Transfer Case
Refer to the Maintenance Schedule to determine how often to check the lubricant and when to change it. See Maintenance Schedule on page 11‑3.
See also:
Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
To replace one of these bulbs:
1. Open the tailgate. See Tailgate on page 2‑10 for more information.
2. Remove the two rear lamp assembly screws near the tailgate latch strikerpost and pull ...
Ignition Positions
The ignition switch has four different positions.
In order to shift out of P (Park), the ignition must be in ON/RUN or ACC/ACCESSORY and the brake pedal must be applied.
Notice: Using a tool to fo ...
Instrument Panel Illumination Control
This control is located on the instrument panel, to the left of the steering
column.
(Instrument Panel Brightness): Turn
clockwise or counterclockwise to brighten or dim the lights. ...