How to Reinstall Engine Air Cleaner/Filter

1. Install the air cleaner filter into the air cleaner housing. The outer air cleaner filter seal must be fitted properly in the air cleaner housing.
2. Align the air cleaner housing cover tabs to the air cleaner housing.
3. Install the air cleaner housing cover using the four screws.

WARNING

Operating the engine with the air cleaner/filter off can cause you or others to be burned. The air cleaner not only cleans the air; it helps to stop flames if the engine backfires. Use caution when working on the engine and do not drive with the air cleaner/filter off.

Notice: If the air cleaner/filter is off, dirt can easily get into the engine, which could damage it. Always have the air cleaner/filter in place when you are driving.

    See also:

    Under the Hood
    GM's two-mode hybrid system enables "full" hybrid operation with the capability to cruise on electric power up to 30 mph. The gas engine kicks in if more acceleration is needed, as well ...

    Programming Transmitters to the Vehicle
    Only RKE transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer. When the replacement transmitter is ...

    Battery
    The battery supplies power to start the engine and operate any additional electrical accessories. • To avoid break-down or failure to start the vehicle, maintain a battery with full cranking power. ...