Dual Tone Multi-Frequency (DTMF) Tones

The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu&-driven phone system. Account numbers can also be stored for use.

Sending a Number or Name Tag During a Call

1. Press followed by a tone.. The system responds “Ready,” followed by a tone.
2. Say “Dial.”
3. Say the number or name tag to send.

    See also:

    Removing Tools
    The tools needed to remove the spare tire are located in the storage compartment on the driver side, at the rear of the vehicle. 1. Open the jack storage compartment by pulling on the latch tab, loca ...

    Weatherstrips
    Apply silicone grease on weatherstrips to make them last longer, seal better, and not stick or squeak. See Recommended Fluids and Lubricants on page 11‑12. ...

    Using the “Digit Dial” Command
    The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. If an unwa ...