Video Screen Input Jack
Each video screen is equipped with a video input jack to allow video cables to be connected from an auxiliary device such as a camcorder or a video game system. This signal will override any video provided by the RSE system; either the DVD or auxiliary A/V jack source. The RSE system must be on for this input to operate.
See also:
How to Reset the Engine Oil Life System
Reset the system whenever the engine oil is changed so that the system can calculate
the next engine oil change. To reset the system:
1. Turn the ignition to ON/RUN, with the engine off.
2. Press ...
Removing the Spare Tire and Tools
To access the spare tire and tools:
1. Open the liftgate. See Liftgate on page 2‑9.
2. Lift the load floor up.
Coin/Pierce Jack with One-Piece Wrench
A. Extension
B. Wheel Wrench
C. Jack ...
Canceling a Remote Start
To cancel a remote start:
• Aim the RKE transmitter at the vehicle and press and hold
until the parking lamps turn off.
• Turn on the hazard warning flashers.
• Turn the ignition switch on ...





