Vehicle Messages
Messages are displayed on the DIC to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition. Multiple messages may appear one after another.
Some messages may not require immediate action, but you can press SET/CLR to acknowledge that you received the messages and to clear them from the display. Some messages cannot be cleared from the DIC display because they are more urgent. These messages require action before they can be cleared. You should take any messages that appear on the display seriously and remember that clearing the messages will only make the messages disappear, not correct the problem. You will find the possible messages that can be displayed and some information about them grouped by subject in the following information.
See also:
OnStar Personal Identification Number (PIN)
A PIN is needed to access some of the OnStar services, like Remote Door Unlock
and Stolen Vehicle Assistance. You will be prompted to change the PIN the first
time when speaking with an Advisor. T ...
Door Locks
To lock or unlock a door manually:
• From the inside use the door lock knob on the window sill.
• From the outside turn the key toward the front or rear of the vehicle, or press the
or
but ...
Using Cruise Control on Hills
How well the cruise control works on hills depends on the vehicle speed, the load, and the steepness of the hills. When going up steep hills, pressing the accelerator pedal may be necessary to maintai ...