Airbag System Check

The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag readiness light is working. See Airbag Readiness Light on page 5‑11 for more information.

Notice: If an airbag covering is damaged, opened, or broken, the airbag may not work properly. Do not open or break the airbag coverings. If there are any opened or broken airbag covers, have the airbag covering and/or airbag module replaced. For the location of the airbags, see Where Are the Airbags? on page 3‑23. See your dealer for service.

    See also:

    Adding and Removing Categories
    Categories cannot be added or removed while the vehicle is moving faster than 8 km/h (5 mph). To add or remove a category: 1. Press the MENU button. 2. Press the softkey located below the XM CAT ta ...

    Disconnecting the RVC
    The rear vision camera must be disconnected if the tailgate needs to be removed. To disconnect the camera: 1. Remove the license plate. 2. Disconnect the camera connectors from the chassis harness, ...

    Parking Brake
    To set the parking brake, hold the regular brake pedal down, then push the parking brake pedal down. If the ignition is on, the brake system warning light will come on. See Brake System Warning ...