How to Detect a Tamper Condition

If an attempted break-in has occurred while the system was armed. is pressed and the horn sounds, an attempted break-in has occurred while the system was armed.

If the alarm has been activated, the THEFT ATTEMPTED message will appear on the DIC. See Key and Lock Messages on page 5.29 for additional information.

    See also:

    Safety Belt Care
    Keep belts clean and dry. WARNING Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mi ...

    Going & Stopping
    The biggest drawback I found with the Yukon was the powertrain. A 380-horsepower, 6.2-liter V-8 is standard in the Denali, but it was sluggish in almost every passing situation I could simulate. T ...

    Transfer Case Buttons
    The vehicle will have one of these three styles of transfer case controls. Use these controls to shift into and out of the different Four-Wheel Drive modes. Manual Transfer Case This transfer ca ...