Programming Transmitters to the Vehicle

Only RKE transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer. When the replacement transmitter is programmed to this vehicle, all remaining transmitters must also be reprogrammed. Any lost or stolen transmitters will no longer work once the new transmitter is programmed.

    See also:

    Finish Care
    Application of aftermarket clearcoat sealant/wax materials is not recommended. If painted surfaces are damaged, see your dealer to have the damage assessed and repaired. Foreign materials such as ...

    Shutting the Engine Off After a Remote Start
    To manually shut off a remote start: • Aim the RKE transmitter at the vehicle and press until the parking lamps turn off. • Turn on the hazard warning flashers. • Turn the ignition switch on ...

    Removal and Installation of the Sealant Canister
    To remove the sealant canister: 1. Unwrap the sealant hose. 2. Press the canister release button. 3. Pull up and remove the canister. 4. Replace with a new canister which is available from your de ...