Viscosity Grade
SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50.
If in an area of extreme cold, where the temperature falls below −20°F (−29°C), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, always select an oil that meets the dexos1 specification or equivalent. See “Specification” for more information.
See also:
Safety Locks
The rear door safety locks switch is on the instrument panel.
Rear door safety locks prevent passengers from opening the rear doors from inside
the vehicle.
Press to activate the safety locks. ...
How to Reset the Engine Oil Life System
Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. Always reset the engine oil life to 100% after every oil change. It will not reset itse ...
Fabric/Carpet
Start by vacuuming the surface using a soft brush attachment.
If a rotating brush attachment is being used during vacuuming, only use it on the floor carpet.
Before cleaning, gently remove as much o ...