Trailer Brakes
A loaded trailer that weighs more than 900 kg (2,000 lbs) needs to have its own brake system that is adequate for the weight of the trailer. Be sure to read and follow the instructions for the trailer brakes so they are installed, adjusted, and maintained properly.
Do not tap into the vehicle's hydraulic brake system.
See also:
After Off-Road Driving
Remove any brush or debris that has collected on the underbody or chassis, or
under the hood. These accumulations can be a fire hazard. After operation in mud
or sand, have the brake linings clean ...
Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section.
Do not ...
Initial Drive Information
This section provides a brief overview about some of the important features that
may or may not be on your specific vehicle. For more detailed information, refer
to each of the features which can ...