Leaving After Parking on a Hill

1. Apply and hold the brake pedal.

2. Start the engine.

3. Shift into a gear.

4. Release the parking brake.

5. Let up on the brake pedal.

6. Drive slowly until the trailer is clear of the chocks.

7. Stop and have someone pick up and store the chocks.

    See also:

    Ride Control System Messages
    ALL WHEEL DRIVE OFF If your vehicle has the All-Wheel Drive (AWD) system, this message displays when the rear drive system is overheating. This message turns off when the rear drive system cools ...

    Checking Coolant
    The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not ...

    Using the 3.5mm (1/8 in) Auxiliary Input Jack
    The auxiliary input jack is located on the lower right side of the faceplate. This is not an audio output; do not plug a headphone set into the front auxiliary input jack. Connect an auxiliary input ...