Electronic Transfer Case

The transfer case knob is located next to the steering column.
Use the dial to shift into and out of four-wheel drive.
See also:
Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section.
Do not ...
Manual Operation of Power Liftgate
To change the liftgate to manual operation, press OFF on the power liftgate switch. A message displays on the DIC indicating manual operation mode. See Driver Information Center (DIC) (Without DIC B ...
Engine Oil Change
When the CHANGE ENGINE OIL SOON message displays, have the engine oil and filter
changed within the next 1 000 km/600 mi. If driven under the best conditions, the
engine oil life system might not ...





