Curve Tips

• Take curves at a reasonable speed.

• Reduce speed before entering a curve.

• Maintain a reasonable steady speed through the curve . Wait until the vehicle is out of the curve before accelerating gently into the straightaway.

    See also:

    Compass Calibration Procedure
    1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section. Do not ...

    Shifting Out of Four-Wheel Drive Low
    To shift from Four-Wheel Drive Low to Four-Wheel Drive High, AUTO or Two-Wheel Drive High, the vehicle must be stopped or moving less than 5 km/h (3 mph) with the transmission in N (Neutral) and the i ...

    When the System Does Not Seem To Work Properly
    The RVC system may not work properly or display a clear image if: ○ The RVC is turned off. See “Turning the Rear Vision Camera System On or Off” earlier in this section. ○ It is da ...