Voice Recognition
The Bluetooth system uses voice recognition to interpret voice commands to dial phone numbers and name tags.
For additional information, say “Help” while you are in a voice recognition menu.
Noise: Keep interior noise levels to a minimum. The system may not recognize voice commands if there is too much background noise.
When to Speak: A short tone sounds after the system responds indicating when it is waiting for a voice command. Wait until the tone and then speak.
How to Speak: Speak clearly in a calm and natural voice.
See also:
Using the “Re-dial” Command
1. Press and hold for two seconds.
2. After the tone, say “Re-dial.” Once connected, the person called will be heard through the audio speakers. ...
General Information
Your vehicle is an important investment. This section describes the required
maintenance for the vehicle. Follow this schedule to help protect against major
repair expenses resulting from neglect ...
Shifting Into Four-Wheel Drive Low
When Four-Wheel Drive Low is engaged, vehicle speed should be kept below 72 km/h (45 mph).
Extended high-speed operation in Four-Wheel Drive Low may damage or shorten the life of the drivetrain.
To ...