Passenger Sensing System

United States

Canada
The passenger sensing system will turn off the right front passenger frontal airbag under certain conditions. The driver airbag, seat&-mounted side impact airbags, and roof&-rail airbags are not affected by the passenger sensing system.
The passenger airbag status indicator will be visible on the overhead console when the vehicle is started. See Passenger Sensing System on page 3‑28 for more information.
See also:
Flash-to-Pass
This feature is used to signal to the vehicle ahead that you want to pass.
If the headlamps are off or in the low-beam position, pull the turn signal lever toward you to momentarily switch to high be ...
Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information label is attached to the center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock post ...
Jump Starting
For more information about the vehicle battery, see Battery on page 10‑26.
Jump starting can be used on vehicles with run&-down batteries by using jumper
cables and another vehicle.
WARN ...





