Dome Lamps

The dome lamps are located in the overhead console.

They come on when any door is opened and turn off after all the doors are closed.

Turn the instrument panel brightness knob located below the dome lamp override button, clockwise to the farthest position to manually turn on the dome lamps.

The dome lamps remain on until the knob is turned counterclockwise.

Dome Lamp Override

The dome lamp override button is located next to the exterior lamps control.

(Dome Off): Press the button in and the dome lamps remain off when a door is opened. Press the button again to return it to the extended position so that the dome lamps come on when a door is opened.

Reading Lamps (Dome Off): Press the button in and the dome lamps remain off when a door is opened. Press the button again to return it to the extended position so that the dome lamps come on when a door is opened.

    See also:

    Tips and Troubleshooting Chart
    Problem Recommended Action There is no power. The ignition might not be turned to ON/RUN or ACC/ACCESSORY. The picture does not fill the screen. There are black bord ...

    Loading Points
    A. Primary Load Points B. Secondary Load Areas C. Cargo Management Option Holes Structural members (A) and (B) are included in the pick-up box design. Additional accessories should use these loa ...

    Ignition Positions
    The ignition switch has four different positions. To shift out of P (Park), the ignition must be in ON/RUN or ACC/ ACCESSORY and the regular brake pedal must be applied. A (STOPPING THE ENGINE/ LO ...