Cargo Lamp
The cargo lamps come on by turning the instrument panel brightness control knob to the farthest clockwise position. This knob is located on the instrument panel and also turns on the dome lamps.
The cargo lamps can be used if more light is needed in the cargo area of the vehicle or in the top-box storage units.
See also:
Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section.
Do not ...
Using the “Digit Dial” Command
The digit dial command allows a phone number to be dialed by entering the digits one at a time.
After each digit is entered, the system repeats back the digit it heard followed by a tone.
If an unwa ...
How to Add Automatic Transmission Fluid
Refer to Recommended Fluids and Lubricants on page 11‑12 to determine what kind of transmission fluid to use.
Using a funnel, add fluid down the transmission dipstick tube only after checking t ...