Compass Recalibration
This display allows for calibrating the compass. See Compass on page 5‑6 for more information.
See also:
Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section.
Do not ...
Turning the System On and Off
The URPA system can be turned on and off using the rear park aid disable button located next to the radio.
The indicator light comes on when the system is disabled and turns off when the system is ...
Center High-Mounted Stoplamp (CHMSL) and Cargo Lamp
To replace one of these bulbs:
1. Remove the two screws and lift off the lamp assembly.
A. Cargo Lamp
B. Center High-Mounted Stoplamp (CHMSL) Bulb
2. On the reverse side of the lamp assembly, r ...





