Canceling a Remote Start
To cancel a remote start, do one of the following:
○ Press
until the parking lamps
turn off.
○ Turn on the hazard warning flashers.
○ Insert the key and turn it to ON/ RUN and then back to LOCK/OFF.
See Remote Vehicle Start on page 2.5.
See also:
Voltmeter Gauge
This gauge indicates the battery voltage when the ignition is turned on.
When the ignition is on, this gauge indicates the battery voltage.
When the engine is running, this gauge shows the conditi ...
Wipe Parking
If the ignition is turned to LOCK/ OFF while the wipers are on LO, HI, or INT,
they will immediately stop. If the windshield wiper lever is then moved to off before
the driver door is opened or wi ...
Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information label is attached to the center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock post ...





