Compass Zone
The zone is set to zone eight upon leaving the factory. Your dealer will set the correct zone for your location.
Under certain circumstances, such as during a long-distance, cross-country trip or moving to a new state or province, it will be necessary to compensate for compass variance by resetting the zone through the DIC if the zone is not set correctly.
Compass variance is the difference between the earth's magnetic north and true geographic north. If the compass is not set to the zone where you live, the compass may give false readings. The compass must be set to the variance zone in which the vehicle is traveling.
To adjust for compass variance, use the following procedure:
See also:
Remote Keyless Entry (RKE) System
The RKE transmitter is used to remotely lock and unlock the doors from up to 60 m (195 ft) away from the vehicle.
Press
to unlock the driver door.
Press
again within five seconds to unlock a ...
Removing the Third Row Seats
To remove a third row seat:
1. Remove the cargo management system, if available and installed. See Cargo Management System on page 4‑4.
2. Remove anything on or under the seat.
Notice: Foldin ...
Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information label is attached to the center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock post ...