See also:

Range Selection Mode
Range Selection Mode The Range Selection Mode switch, if equipped, is located on the shift lever. To enable the Range Selection feature: 1. Move the column shift lever to the M(Manual) position ...

Shifting Out of Neutral
To shift out of N (Neutral) do the following: 1. Set the parking brake and apply the regular brake pedal. 2. Turn the ignition to ON/RUN with the engine off, and shift the transmission to N (Neutral ...

Compass Calibration
The compass can be manually calibrated. Only calibrate the compass in a magnetically clean and safe location, such as an open parking lot, where driving the vehicle in circles is not a danger. It is ...