Setting the Clock

To set the time and date:

1. Turn the ignition key to ACC/ ACCESSORY or ON/RUN, then press 2. Press, to turn the radio on.

2. Press 3. Press the softkey located under any one of the labels to be changed. to display HR, MIN, MM, DD, and YYYY (hour, minute, month, day, and year).

3. Press the softkey located under any one of the labels to be changed.

4. To increase or decrease the time or date, turn For detailed instructions on setting the clock for the vehicle's specific audio system, see Clock on page 5‑8. clockwise or counter-clockwise.

For detailed instructions on setting the clock for the vehicle's specific audio system, see Clock on page 5‑8.

    See also:

    Engine Hour Meter Display
    The Driver Information Center (DIC) can also display the number of hours the engine has run. To display the engine hours, turn the ignition off, then press and hold the reset button for at least four ...

    Compass Zone Setting
    This display allows for setting the compass zone. See Compass on page 5‑6 for more information. ...

    Rear Vision Camera Error Messages
    Service Rear Vision Camera System: This message can display when the system is not receiving information it requires from other vehicle systems. If any other problem occurs or if a problem persists, ...