Sheet Metal Damage
If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection.
Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty.
See also:
Removing and Replacing the Floor Mat
The driver side floor mat is held in place by two retainers.
1. Pull up on the rear of the floor mat to unlock each retainer and remove.
2. Reinstall by lining up the floor mat retainer openings o ...
Towing the Vehicle
Notice: To avoid damage, the disabled vehicle should be towed with all four wheels off the ground. Care must be taken with vehicles that have low ground clearance and/or special equipment. Always flat ...
Starting the Engine Using Remote Start
To start the engine using the remote start feature:
1. Press and release on the RKE
transmitter.
2. Press and hold for about two
seconds. The turn signal lamps will briefly flash to confirm th ...