Connecting to a Different Phone

To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all the available cell phones were paired. Depending on which cell phone you want to connect to, you may have to use this command several times.

1. Press and hold 2. Say “Bluetooth.” 3. Say “Change phone.” . If another cell phone is found, the response will be “<Phone name> is now connected.” . If another cell phone is not found, the original phone remains connected. for two seconds.

2. Say “Bluetooth.” 3. Say “Change phone.” . If another cell phone is found, the response will be “<Phone name> is now connected.” . If another cell phone is not found, the original phone remains connected.

    See also:

    Leaving the Vehicle with the Engine Running
    WARNING It can be dangerous to leave the vehicle with the engine running. The vehicle could move suddenly if the shift lever is not fully in P (Park) with the parking brake firmly set. And, if you l ...

    Driving in Mud, Sand, Snow, or Ice
    Use a low gear when driving in mud – the deeper the mud, the lower the gear. Keep the vehicle moving to avoid getting stuck. Traction changes when driving on sand. On loose sand, such as on beaches ...

    Cleaning Exterior Lamps/ Lenses and Emblems
    Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps and lenses. Follow instructions under "Washing the Vehicle" later in this section. ...