Repeat Functionality

To use Repeat:

Press the softkey below (Repeat All): Press the softkey below to repeat all tracks. or (Repeat All): Press the softkey below to repeat all tracks. to select between Repeat All and Repeat Track.

The tab appears lowered when Repeat All is being used. This is the default mode when a USB storage device or iPod is first connected. (Repeat All): Press the softkey below The tab appears lowered when Repeat All is being used. This is the default mode when a USB storage device or iPod is first connected. to repeat all tracks.

The tab appears lowered when Repeat All is being used. This is the default mode when a USB storage device or iPod is first connected.

'(Repeat Track): Press the softkey below'to repeat one track. The tab appears raised when Repeat Track is being used.

    See also:

    Manual Trailer Brake Apply
    The Manual Trailer Brake Apply Lever is located on the Trailer Brake Control Panel and is used to apply the trailer’s electric brakes independent of the vehicle’s brakes. This lever is used in th ...

    Headlamp High/Low-Beam Changer
    Headlamp High/Low&-Beam Changer: Push the turn signal/lane change lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward yo ...

    When to Check and Change Automatic Transmission Fluid
    It is usually not necessary to check the transmission fluid level. The only reason for fluid loss is a transmission leak or overheated transmission. If a small leak is suspected, then use the followi ...