Clock

To adjust the time and date:
1. Turn the ignition key to ACC/ACCESSORY or ON/RUN, then press 2. Press  to display HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year). to turn the radio on.
2. Press 3. Press the pushbutton located under any one of the labels to be changed. to display HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year).
3. Press the pushbutton located under any one of the labels to be changed.
4. To increase the time or date, do one of the following:
• Press the pushbutton below the selected label.
• Press • Press  FWD. SEEK.
• Press • Turn  clockwise. FWD.
• Turn 5. To decrease the time or date, do one of the following: clockwise.
5. To decrease the time or date, do one of the following:
• Press • Press  REV. SEEK.
• Press • Turn  counterclockwise. REV.
• Turn To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year: counterclockwise.

To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year:
1. Press 2. Press the pushbutton located under the desired option. and then the pushbutton located under the forward arrow that displays on the radio screen until the time 12H (hour) and 24H (hour), and the date MM/DD (month and day) and DD/MM (day and month) display.
2. Press the pushbutton located under the desired option.
3. Press Power Outlets again to apply the selected default, or let the screen time out.

    See also:

    Steering, Suspension, and Chassis Components
    Visually inspect front and rear suspension and steering system for damaged, loose, or missing parts or signs of wear. Inspect power steering lines and hoses for proper hook-up, binding, leaks, cracks, ...

    Listing Stored Numbers
    The list command will list all stored numbers and name tags. Using the “List” Command 1. Press and hold for two seconds. 2. Say “Directory.” 3. Say “Hands-Free Calling.” 4. Say “List ...

    Center High-Mounted Stoplamp (CHMSL) and Cargo Lamp
    To replace one of these bulbs: 1. Remove the two screws and lift off the lamp assembly. A. Cargo Lamp B. Center High-Mounted Stoplamp (CHMSL) Bulb 2. On the reverse side of the lamp assembly, r ...